Technology of laying gypsum tiles with your own hands Leave a comment

Gypsum tiles have to be laid correctly, as not just the aesthetic appearance of cosmetic facing, but in addition the service life

of the material will depend on the technologies of work. The product is also universal, and it may be attached to plaster,

concrete, brick or gypsum board sheets, and provided the surface of the base is even and has no flaws.

In the event the flaws of this foundation are significant, it ought to be completely treated with primer, then a cement mortar is

created, which fills all the cracks. Subsequently the surface should be primed and dried. In cases like this, its composition

should select a special, containing components that prevent the appearance of fungus and mould.

In the modern interior of the rooms most frequently used gypsum tiles, even imitating natural brick or stone. To carry out

decorative finishing yourself, it’s essential first of all to pick a scheme of tile positioning and prepare a solution. It’s

important to look closely at the reverse side of the material. If its surface includes an embossed surface, then the adhesive

should be placed with an even trowel, and if it is even, then using a notched one.

The technologies of the work is as follows:

* A thin coating of adhesive is placed on the pre-prepared wall. It’s distributed over the base so it is likely to place 4-5

tiles. Decorative cladding may be placed either on plasterboard, and on putty.

* Cover the rear side of the tiles with glue.

* Plaster elements are pushed against the wall and their place is corrected. To align with the seams, it is suggested to use

spacers.

* Finishing is performed in rows, all which ought to be shifted by half a tile. Facing is completed to the corners of the space,

then immediately remove any remaining mortar in the joints.

Drying the walls requires no more than a day also requires a constant humidity and temperature inside the room. The final stage in

the laying of gypsum tiles is their own decoration. To do this, the joints between the components are filled with a unique

solution, the color of which suits the brick.

masterfasada.ru

Decorative imitation of brickwork on the walls has been carried out in the following manners:

* Cutting on the darkened surface of the pits of masonry with a bolt cutter with your own hands;

* placing of tiles under the brick:

* mimicking the structure and color of the side of a single brick;

* Imitating a fragment of brickwork of several bricks.

The perfect approach to decorate”under the brick” is really the one which permits you to make a practical coating together with

the most appearance of its similarity to natural masonry. All 3 methods to execute this sort of finishing functions meet the

demands, but the cutting of joints using a bolt will be labor-intensive along with the creation of large quantities of dust, so

let’s consider more typical ways.

The old finish is removed from the walls, and also the surface, if necessary, is leveled to get rid of the need to glue plaster on

a thick layer of glue.

Combining such cladding with different kinds of interior finishes may be both systematic and done with no apparent consistency,

chaotically, together with fake of indications of aging.

With the support of cosmetic gypsum tiles it’s possible to imitate a large number of textures.

A large number of textures may be imitated with the help of decorative gypsum tiles.

The wall on which it’s to be set up must have the following characteristics:

* Hardness and strength of the surface;

* The lack of irregular areas and sharp differences;

* no deformations.

Decorative tiles in the interior of this kitchen

Walls are made from a number of substances, so let’s break down the principles of installment.

When working with concrete, there’ll be no big problems. It is only required to take into account the porosity of this material.

Concrete, which has almost no pronounced pores, should be treated with a fantastic primer.

Mounting gypsum tiles on concrete

Before starting work on the setup of gypsum tiles on the walls, then it is worth assessing the strength of this surface. When the

plaster does not drop off the wall and in precisely the same time holds nicely, you can simply paint it with primer.

Mount the tiles on the painted concrete shouldn’t. The surface should be scratched, making sure to misfire, and it needs to be

grouted and coated with a coating of plaster.

Leave a Reply